Jump to content
Sign in to follow this  
GCarr

Cheek Blocks To Divert The Vang Sheet Away From The Hatch Opening?

Recommended Posts

I installed a couple of the 29mm Harkins in the corners.  Thru-bolted in deck.  Use ni-lock nuts and fender washers below and cut off the screws flush with the bolt heads with a Dremel tool.  They work well to open up the hatch.  Also, install a loop of shock cord to lift the vang up to the boom when the vang is slack.  Not convenient to take pictures right now.

Share this post


Link to post
Share on other sites

I installed a couple of the 29mm Harkins in the corners.  Thru-bolted in deck.  Use ni-lock nuts and fender washers below and cut off the screws flush with the bolt heads with a Dremel tool.  They work well to open up the hatch.  Also, install a loop of shock cord to lift the vang up to the boom when the vang is slack.  Not convenient to take pictures right now.

 

Great we are on the right track!

 

Thanks for the tip on the bungee and the vang.

 

Cheers,

G

Share this post


Link to post
Share on other sites
Sign in to follow this  

×